Waterous CM Series, Руководство по установке, Страница: 43 / 56

43
|
56
Safety Introduction Product Overview Installation
Installing the Transfer Valve Actuator—Manual Version
1
3
4
Installing the Handle
Use the illustrations and instructions to install the
handle onto the manual transfer valve actuator.
1 Slide the thrust bearing onto the remote shaft.
2 Press the remote shaft through the control
panel hole, then press the remote body onto
the shaft.
3 Use the hardware provided to secure the
remote body to the back of the control panel.
4 Install the handle onto the shaft, then secure it
with a spirol pin.
2