Waterous CM Series, Руководство по установке, Страница: 26 / 56

26
|
56
Safety Introduction Product Overview Installation
CMK/CMUK—Installing the Pump
Use the illustration and instructions to install the
CMK or CMUK pump assembly.
Note: Install the pump where it is accessible for
regular maintenance. The pump location must
also comply with drive shaft requirements.
1 Create angle brackets to attach to the intake
mounting pads.
Note: Mounting brackets are application-
specific and supplied by the installer.
2 Attach the angle brackets to the intake
adapters. Refer to: "Mounting the Angle
Brackets" on page 30.
3 Use locally sourced hardware to secure the
brackets to the frame rails using the 3-point
mounting method. Refer to: "Mounting the
Pump" on page 33.
4 Provide additional support for the pump
assembly and any intake or discharge
plumbing as needed.
1