Waterous CM Series, Руководство по установке, Страница: 14 / 56

14
|
56
Safety Introduction Product Overview Installation
CMC22/CMUC22 (Front-Mounted)
Feature Feature Description Description
1 Body assembly The body assembly consists of the volute body and volute cover.
2 Intake adapter This connects the pump to the water source.
3 Intake mounting pad This is where the installer-supplied angle bracket is attached to the pump.
4 Front support mounting hole This is where the installer-supplied front support bracket is attached to the pump.
5 Transmission This increases the speed of the pump and can transfer incoming power to either the pump or driveline. C22 transmissions
are available with both an input and output shaft or the input shaft only—input and output option shown.
6 Transmission spacer This is placed between the transmission body and cap to create space for different drops and gear ratios—C drop with
2.27 ratio shown.
7 Drive shaft This connects the pump to the driveline.
1
2
6
5
2
4
7
3
7