Waterous CM Series, Руководство по установке, Страница: 20 / 56

20
|
56
Safety Introduction Product Overview Installation
Electric Transfer Valve Actuator
Feature Feature Description Description
1 Gear motor This creates the force to move the valve.
2 Encoder This monitors the position of the actuator and sends it to the control panel.
3 Connector This connects to the extension cable that goes between the control panel and encoder—DT04-4P.
4 Connector This connects to the motor extension cable that goes between the power relay module and gear motor.
5 Actuator housing This houses the actuator's mechanical components.
6 Top mounting bracket This is used to mount the actuator on the top of the pump.
7 Bottom mounting bracket This is used to mount the actuator on the bottom of the pump.
3 3
5
6
2 2
5
1 1
7
4
4