WAGNER EPG-SPRINT, Перевод оригинального руководства по эксплуатации

Страница: 49 / 68

49
EPG-SPRINT .
OPERATING MANUAL
VERSION 08/2010 ORDER NUMBER DOC 2305222
Warning No. Warning Cause Rectifi cation
E02 Dosage air too low. Set set point cannot be
reached.
Causes:
●
Hose kinked / blocked.
●
Input air pressure too low.
●
Injector is not connected.
●
System cannot reach target
setting.
●
Check hoses and hose
laying.
●
Ensure that input pressure is
greater than 6 bar.
●
Connect injector.
●
Select smaller set point
value.
Example: feed air for
ED pump max. 3.5 Nm³/h.
E03 Feed air too low. Set set point cannot be
reached.
Causes:
●
Hose kinked / blocked.
●
Input air pressure too low.
●
Injector is not connected.
●
System cannot reach target
setting.
●
Check hoses and hose
laying.
●
Ensure that input pressure is
greater than 6 bar.
●
Connect injector.
●
Select smaller set point
value.
Example: feed air for
ED pump max. 3.5 Nm³/h.
E04 Fallen below Tribo
current limit for 10 s. The Tribo current set in the
confi guration cannot be
reached.
Causes:
●
Tribo air set too low.
●
Powder not fl owing due to
incorrect settings for feed air
and total air.
●
No powder in container.
●
The powder does not have
the required charging
characteristics.
●
Increase Tribo air.
●
Correct feed air and total air
settings.
●
Fill powder container.
●
Use suitable powder.