WAGNER EPG-SPRINT, Перевод оригинального руководства по эксплуатации

Страница: 8 / 68

8
EPG-SPRINT .
OPERATING MANUAL
VERSION 08/2010 ORDER NUMBER DOC 2305222
2.3
USING IN ACCORDANCE WITH THE INSTRUCTIONS
7!'.%2ACCEPTSNOLIABILITYFORANYDAMAGEARISINGFROMINCORRECTUSE
œ 5SETHEUNITONLYTOWORKWITHTHEMATERIALSRECOMMENDEDBY7!'.%2
œ /PERATETHEUNITONLYASANENTIREUNIT
œ $ONOTDEACTIVATESAFETYEQUIPMENT
œ 5SEONLY7!'.%2ORIGINALSPAREPARTSANDACCESSORIES
2.2.5
HANDLING POWDER PAINTS
œ
Take note of the processing regulations laid down by the manufacturer of the powder
paint being used, when preparing or processing the powder.
œ
Take note of the manufacturer’s advice and the relevant environmental protection
regulations when disposing of powder paints.
œ
Implement the prescribed safety measures, in particular the wearing of safety glasses
and safety clothing as well as the use of protective hand cream.
œ
Use dust masks or breathing apparatus.
œ
To ensure sufficient protection of health and the environment, only operate the device
in a powder booth or at a spray wall with activated ventilation (exhaust air).
2.4.1
USING IN ACCORDANCE WITH THE INSTRUCTIONS
2.4.2
EXPLOSION PROTECTION IDENTIFICATION
2.4
FOR USE IN POTENTIALLY EXPLOSIVE AREAS
The EPG-SPRINT control units are intended for use with powder spray guns of types A-P up
to 2 mJ in accordance with the prototype test PTB 06 ATEX 5003.
The EPG-Sprint control unit may be used in the dust explosion zone (zone 22) under the
following conditions:
●
Control unit correctly fitted in rack.
●
Rack correctly and securely sealed on rear with associated cover.
The device is suited for use in areas at risk from explosions, in accordance with Test
Certificate PTB 06 ATEX 5003.
II 3D IP 64 80°C
CE: Communautés Européennes
Ex: Symbol for explosion protection
II: Unit class II
3: Category 3 (zone 22)
D: Ex-atmosphere dust
IP64: Protection class 64
80°C: Temperature class: max. surface temperature < 80°C; 176°F