Wacker Neuson Cub 200, Руководство по ремонту

Страница: 22 / 64

Burner Setup Cub 200/300
22
ghi_tx001317gb.fm
3.4 Checking and Adjusting the Burner Electrodes
Requirements Burner assembly removed
Background Inspect the electrodes for the following:
„
Wear
Be sure to inspect the ends of the electrodes for pitting. Replace any worn elec-
trodes.
„
Straightness
Replace any bent or broken electrodes.
„
Cleanliness
Clean the electrodes with a soft dry cloth or replace if necessary.
„
Correct alignment
Align the electrodes as shown.
Procedure Perform the procedure to replace or align the electrodes.
1. Remove the burner assembly from the machine.
2. Loosen the screw (1) .
3. Align the electrode as shown or remove and install new electrodes if necessary.
4. Tighten the screw (1) .
5. Reinstall the burner.
Result The electrodes have now been adjusted.