Wacker Neuson Cub 200, Руководство по ремонту

Страница: 11 / 64

Cub 200/300 Safety Information
ghi_si000343gb.fm
11
1.5 Safety Guidelines for Maintaining the Machine
Training
„
Only trained personnel should troubleshoot or repair electrical problems occur-
ring with the machine.
Cleaning When cleaning and servicing the machine:
„
Keep the area around the burner free of debris such as leaves, paper, cartons,
etc.
„
Keep the machine clean and labels legible.
When cleaning the machine:
„
Do not clean the machine while it is running.
„
Never use gasoline or other types of fuels or flammable solvents to clean parts.
Fumes from fuels and solvents can become explosive.
Maintenance
guidelines When maintaining the machine:
„
Keep the fuel lines in good condition and properly connected.
„
Allow the burner to cool before maintaining the machine.
„
Reinstall the safety devices and guards after repairs and maintenance.
„
Keep all electrical cords away from heat, oil, vibrating surfaces, and sharp
edges.
„
Inspect all electrical cords before each use and replace damaged cords.
Replacing
parts and
labels When maintaining the machine:
„
Replace worn or damaged components.
„
Use only spare parts recommended by Wacker Neuson Corporation.
„
Replace all missing and hard-to-read labels.
„
Replace or repair electrical components with components that are identical in
rating and performance as the original component.
Accessories,
safety devices
and
modifications When using the machine:
„
Use only accessories/attachments that are recommended by Wacker Neuson
Corporation.
When using the machine:
„
Never operate the machine if any safety devices or guards are missing or inop-
erative.
„
Do not defeat safety devices.
„
Do not modify the machine without the express written approval of the manufac-
turer.