Vmac G300003, Инструкция по установке, эксплуатации и обслуживанию

Страница: 28 / 100

VMAC
– Vehicle Mounted Air Compressors
VMAC Technical Support: 1-888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
26
4) Turn the ignition key switch to the “START” position and hold it there until
the engine starts (maximum of 5 seconds) (Figure 14).
Figure 14
– Key switch
If the engine fails to start within 5 seconds, release the key and
wait at least 10 seconds before operating the starter again.
Using the starter for more than 5 seconds at a time will
overheat the starter motor and may damage it.
5) Once the engine is running, gradually open the choke by moving the
choke lever to the right as the engine warms up (Figure 15).
Figure 15
– Choke
6) Once the engine has reached normal operating temperature, release the
tension on the unloader valve (Figure 16).
Figure 16
– Unloader valve
While the unloader valve is actuated the system will only build
to 40 psi. Once the engine has warmed up, close the unloader
valve to allow the system to build to full system pressure.
Choke lever
Off
Unloader valve