Vmac G300003, Инструкция по установке, эксплуатации и обслуживанию

Страница: 30 / 100

VMAC
– Vehicle Mounted Air Compressors
VMAC Technical Support: 1-888-241-2289
VMAC Knowledge Base: www.kb.vmacair.com
28
4) Pull the starter grip lightly until resistance is felt, then pull briskly in the
direction of the arrow. Return the starter grip gently to prevent damage to
the starter (Figure 19).
Figure 19
– Key switch
8) Once the engine is running, gradually open the choke by moving the
choke lever to the right as the engine warms up (Figure 20).
Figure 20
– Choke
9) Once the engine has reached normal operating temperature, release the
tension on the unloader valve (Figure 21).
Figure 21
– Unloader valve
While the unloader valve is actuated the system will only build
to 40 psi. Once the engine has warmed up, close the unloader
valve to allow the system to build to full system pressure.
Choke lever
Off
Unloader valve