163
if-range
dhcp-snooping host
This command configures the maximum host count for
the specific ports.
if-range
no dhcp-snooping
host
This command configures the maximum host count to
default for the specific ports.
if-range
dhcp-snooping trust
This command configures the trust port for the specific
ports.
if-range
no dhcp-snooping
trust
This command configures the un-trust port for the
specific ports.
Example:
L2SWITCH#configure terminal
L2SWITCH(config)#dhcp-snooping enable
L2SWITCH(config)#dhcp-snooping vlan 1
L2SWITCH(config)#interface 1/0/1
L2SWITCH(config-if)#dhcp-snooping trust
7.1.1.3.
Web Configuration
DHCP Snooping
Parameter
Description
State
Select
Enable
to use DHCP snooping on the Switch. You still have to
enable DHCP snooping on specific VLANs and specify trusted ports.
Note: The Switch will drop all DHCP requests if you enable DHCP
snooping and there are no trusted ports.
Select
Disable
to not use DHCP snooping.
VLAN State
Select
Add
and enter the VLAN IDs you want the Switch to enable
DHCP snooping on. You can designate multiple VLANs individually
by using a comma (,) and by range with a hyphen (-).
Select
Delete
and enter the VLAN IDs you no longer want the Switch
to use DHCP snooping on.
