110
System Priority
LACP system priority is a number between 1 and 65,535. The switch with
the lowest system priority (and lowest port number if system priority is the
same) becomes the LACP “server”. The LACP “server” controls the
operation of LACP setup. Enter a number to set the priority of an active
port using Link Aggregation Control Protocol (LACP). The smaller the
number, the higher the priority level.
Group LACP
Select a trunk group ID and then select whether to
Enable
or
Disable
Group Link Aggregation Control Protocol for that trunk group.
Port Priority
Select a port or a range of ports to configure its (their) LACP priority.
Apply
Click Apply to configure the settings.
Refresh
Click this to reset the fields to the last setting.
LACP Group Status
Group ID
The field identifies the LACP group ID.
LACP State
This field displays if the group has LACP enabled.
LACP Port Priority Status
Port
The field identifies the port ID.
Priority
The field identifies the port’s LACP priority.
