117
6.9.3.
Web Configuration
Parameter
Description
State
Select this option to enable loop guard on the Switch.
MAC Address
Enter the destination MAC address the probe packets will be sent to.
If the port receives these same packets the port will be shut down.
Port
Select a port on which to configure loop guard protection.
State
Select
Enable
to use the loop guard feature on the Switch.
Loop Recovery
Select
Enable
to reactivate the port automatically after the designated
recovery time has passed.
Recovery Time
Specify the recovery time in minutes that the Switch will wait before
reactivating the port. This can be between 1 to 60 minutes.
Apply
Click
Apply
to save your changes to the Switch.
Refresh
Click
Refresh
to begin configuring this screen afresh.
Loop Guard Status
Port
This field displays a port number.
