144
to 10 seconds.
Priority
Priority is used in determining the root switch, root port and designated port.
The switch with the highest priority (lowest numeric value) becomes the STP
root switch. If all switches have the same priority, the switch with the lowest
MAC address will then become the root switch.
Enter a value from 0~61440.
The lower the numeric value you assign, the higher the priority for this bridge.
Priority determines the root bridge, which in turn determines the Root Hello
Time, Root Maximum Age and Root Forwarding Delay.
Pathcost
Path cost is the cost of transmitting a frame on to a LAN through that port. It is
recommended to assign this value according to the speed of the bridge. The
slower the media, the higher the cost.
Port Parameters
Parameter
Description
Port
Selects a port that you want to configure.
Active
Enables/Disables the spanning tree function for the specific port.
Path Cost
Configures the path cost for the specific port.
Priority
Configures the priority for the specific port.
Edge Port
Configures the port type for the specific port. Edge or Non-Edge.
