108
smaller the number, the higher the priority level.
System ID:
The LACP system ID is the combination of the LACP system priority value and the MAC address
of the router.
Administrative Key:
The administrative key defines the ability of a port to aggregate with other ports. A port's ability
to aggregate with other ports is determined by these factors:
Port physical characteristics, such as data rate, duplex capability, and point-to-point or
shared medium.
Configuration restrictions that you establish.
Port Priority:
The port priority determines which ports should be put in standby mode when there is a hardware
limitation that prevents all compatible ports from aggregating.
Default Settings
The default System Priority is 32768.
The default group LACP state is disabled for all groups.
6.7.2.2.
CLI Configuration
Node
Command
Description
enable
show lacp counters
[GROUP_ID]
This command displays the LACP counters for the
specific group or all groups.
enable
show lacp internal
[GROUP_ID]
This command displays the LACP internal
information for the specific group or all groups.
enable
show lacp neighbor
[GROUP_ID]
This command displays the LACP neighbor’s
information for the specific group or all groups.
enable
show lacp port_priority This command c displays the port priority for the
LACP.
enable
show lacp sys_id
This command displays the actor’s and partner’s
system ID.
configure
lacp (disable | enable)
This command disables / enables the LACP on the
switch.
configure
lacp GROUP_ID
(disable | enable)
This command disables / enables the LACP on the
specific trunk group.
configure
clear lacp counters
[PORT_ID]
This command clears the LACP statistics for the
specific port or all ports.
configure
lacp system-priority <1-
65535>
This command configures the system priority for the
LACP. Note: The default value is 32768.
configure
no lacp system-priority This command configures the default for the system
priority for the LACP.
interface
lacp port_priority <1-
65535>
This command configures the priority for the specific
port.
Note: The default value is 32768.
