130
Interval
The interval to send the packet probes to check if the host is still alive.
Retry Time
The retry times when no response from the host for the keep-a-live
probe packet.
Action
The action to the Power Device when the system detects that the Power
Device cannot respond the keep-a-live probe packet. The options have
Reboot / Alarm / All /None.
Power Off Time
When PD has been rebooted, the PoE port restored power after the
Power Off Time time.
Start Up Time
The Switch waits the Start Up Time to do PoE Auto Checking when
the PD is rebooting.
Apply
Click
Apply
to take effect the settings.
Refresh
Click
Refresh
to begin configuring this screen afresh.
6.11.4.
Power Delay
6.11.4.1.
Introduction
The Power Delay allows the user to setting the delay time of power providing after device
rebooted.
6.11.4.2.
CLI Configuration
Node
Command
Description
enable
show poe power-delay
This command displays the PoE power delay
configurations.
interface
poe power-delay
(enable|disable)
This command enables / disables of the Power
Delay function for the specific port.
interface
poe power-delay time VALUE This command configures the delay time of the
Power Delay for the specific port.
configure interface range
gigabitethernet1/0/
PORTLISTS
This command enters the interface configure
node.
if-range
poe power-delay
(enable|disable)
This command enables / disables of the Power
Delay function for the range of ports.
if-range
poe power-delay time VALUE This command configures the delay time of the
Power Delay for the range of ports.
