105
parameter. This option allowed up to 8
addresses.
dhcp-
server
no netbios-name-server
<IPADDR>
This command disables already configured
IP address from NetBios server parameter.
dhcp-
server
netbios-node-type (b-node|h-
node|m-node|p-node)
This command configures pool with NetBios
node type parameter.
dhcp-
server
no netbios-node-type (b-
node|h-node|m-node|p-node)
This command disables already configured
NetBios node type parameter from pool.
dhcp-
server
domain-name
<DOMAIN_NAME>
This command configures pool with
specified string as DNS domain name
parameter.
dhcp-
server
no domain-name
<DOMAIN_NAME>
This command disables already configured
DNS domain name parameter from pool.
dhcp-
server
host client-id ascii [HEX-
STRING]
[OPTION][OPTION_VALUE]
This command binds option parameter with
specified client_id in pool.
dhcp-
server
no host client-id ascii [HEX-
STRING]
[OPTION][OPTION_VALUE]
This command deletes option parameter with
specified client_id from pool.
dhcp-
server
host client-id ip-addr [HEX-
STRING]
[OPTION][IPADDR]
This command binds specified IP address
option parameter with specified client_id in
pool.
dhcp-
server
no host client-id ip-addr [HEX-
STRING]
[OPTION][IPADDR]
This command deletes specified IP address
option parameter with specified client_id
from pool.
6.7.
Link Aggregation
6.7.1.
Static Trunk
6.7.1.1.
Introduction
Link Aggregation (Trunking) is the grouping of physical ports into one logical higher-capacity
link. You may want to trunk ports if for example, it is cheaper to use multiple lower-speed links
than to under-utilize a high-speed, but more costly, single-port link.
However, the more ports you aggregate then the fewer available ports you have. A trunk group
is one logical link containing multiple ports. The Switch supports both static and dynamic link
aggregation.
Note
: In a properly planned network, it is recommended to implement static link aggregation
only. This ensures increased network stability and control over the trunk groups on your Switch.
Default Settings
The default group Link Aggregation state is disabled for all groups.
The default group Link Aggregation load balance is source MAC and destination MAC for
all groups.
