Vitl Co-mix, Инструкция по эксплуатации

Страница: 21 / 51

Instructions for Use
21
6.3.2 Pre-defined Mixing Programs
The unit has eight pre-defined mixing programs which support the commonly
used plates and micro test tubes listed in Table 7.
These programs are listed in Table 8, along with details of the pre-set mixing
speed and time parameters, the recommended well or tube fill level and the
required adaptor block type.
Table 8: Pre-defined Mixing Programs
Program
ID
Plate or Tube
Type
Speed
(RPM)
Time
(seconds)
Fill
Level
Adaptor
Block
MTP-96 96 well MTP 1000 30 5 to 60% x
DWP-96 96 well DWP 1650 30 5 to 50% x
PCR-96
96 well PCR plate
0.2ml tubes or strips
1650 30 5 to 50% 1
MTP-384 384 well MTP 2000 15 10 to 60% x
DWP-384 384 well DWP 2000 15 10 to 60% x
PCR-384 384 well PCR plate 2600 15 10 to 50% x
Micro 0.5 0.5ml micro tubes 1650 30 5 to 50% 2
Micro 1.5/2.0 1.5ml micro tubes
2.0ml micro tubes
1400 60 5 to 80% 3
Other mixing speeds and times can be selected using the free-
style MIX program (see section 6.3.1) or by creating a new user-
defined program (see section 6.3.5 for details).
The procedure for mixing using a pre-defined program is similar to that
described in section 6.3.1 for the free-style MIX program.
First select the appropriate pre-defined program from the selection grid, and
then press the
Accept
button to load it.
→ → →