Vitl Co-mix, Инструкция по эксплуатации

Страница: 36 / 51

Instructions for Use
36
The
Accept
button is also used to skip over unmodified values. For instance,
to change just the RPM, MINS and SECS values:
1) Enter the new RPM value followed by
Accept
2) Press the
Accept
button twice (skips DAYS and HRS)
3) Enter the new MINS value followed by
Accept
4) Enter the new SECS value followed by
Accept
5) Press
Accept
again (skips RAMP)
When all six values had been accepted, the new settings are saved and the
display returns to the previous profile editing screen.
To enter a new step at the end of the sequence, move the cursor
Down
to
the empty “
...
” line and press the
Modify
button. Enter the new step
parameters as required, and then press the
Accept
button until all six values
have been set.
Repeat this process for up to 20 profiles steps.