Vitl Co-mix, Инструкция по эксплуатации

Страница: 18 / 51

Instructions for Use
18
The display now shows the current program parameters, which can be
manually changed using the
Increase
and
Decrease
buttons below the
speed and time values. Any changes are automatically saved in memory.
Programs Profile Clamp Mute Start
For the MIX program, the
Increase
and
Decrease
buttons are
always enabled to allow the speed and time parameters to be
freely changed, even when the mixer is running.
Place the plate or adaptor block vertically down into the plate holder, making
sure it is sitting flat on the base of the holder.
WARNING
Injury can occur from flying plates and tubes if they are not
correctly inserted, or if the maximum recommended mixing
speed or total load weight is exceeded (see section 6.3).