Vitl Co-mix Скачать руководство пользователя страница 44

Страница: 44 / 51

Instructions for Use

8.4

Transportation and Storage

The Co-mix unit and its accessories should be thoroughly decontaminated

using the procedure detailed in section 8.3 before being placed in its original

packaging for transportation or storage.

WARNING

Refer to section 11 for the acceptable range of Storage and

Transportation environmental conditions.

Always ensure that the unit and accessories are completely

dry and free of any condensation before being packed.

8.5

Product Disposal

At end-of-life, this product must be disposed of in accordance with your local

authority regulations for the disposal of potentially hazardous waste and

electronic equipment.

The unit and its accessories should be decontaminated using the procedure

detailed in section 8.3 before disposal or shipping.

Do not dispose of this product into unsorted municipal waste

or public landfill.

Please contact your distributor (or ITL at the address on page 2 of this

manual) for details of how to correctly dispose of this product.

Содержание Co-mix




















































Результаты поиска

Содержание Co-mix

Отзывы:

Похожие инструкции для Co-mix

Бренды по названию

Популярные бренды

Vitl Co-mix, Инструкция по эксплуатации

Результаты поиска

Содержание Co-mix

Отзывы:

Похожие инструкции для Co-mix

Бренды по названию

Популярные бренды