Vitl Co-mix, Инструкция по эксплуатации

Страница: 16 / 51

Instructions for Use
16
6.3 Mixing Plates and Tubes
The mixer is designed to handle commonly used standard sample plates and
micro test tubes, as listed in Table 7.
Table 7: Supported Plate and Tube Types
Plate or Tube Type
Plate
Holder
Adaptor Block Type
PCR 0.2 ml 0.5 ml 1.5 / 2.0 ml
x 1 2 3
MTP 96 and 384 Well
 
DWP 96 and 384 Well
 
Fully-skirted PCR Plate
 
Semi-skirted PCR Plate
 
Un-skirted PCR Plate
 
PCR 0.2 ml Tubes
 
0.5 ml Tubes
 
1.5 ml Tubes
 
2.0 ml Tubes
 
CAUTION

All plates must conform to the ANSI/SBS Standard for
Microplates to ensure secure positioning in the plate holder.

The maximum permissible mixing speed for DWPs and
Adaptor Blocks, or

other plates over 80g, is 2000 RPM.
The Co-mix has eight pre-defined programs with recommended mixing
speeds and times to support the plate and tube types listed in Table 7. Refer
to section 6.3.2 and Table 8 for details.
The unit can also store over 90 user-defined mixing programs to easily
facilitate the use of other specific plates, sample types and fill volumes. See
section 6.3.5 for details.
Other specialist adaptor blocks may be available on request.
Please contact your distributor with your specific requirements.