Instructions for Use
7
CAUTION
There is a possible finger crush hazard due to moving parts.
Do not remove or replace any consumables, tubes or Adaptor
Blocks whilst the plate mixer is running.
Do not remove the vortexer pad when the unit is switched on.
Unit Maintenance and Serviceability
DANGER
WARNING
There are no user or operator serviceable parts inside the
unit.
Do not remove the unit casework.
Removal of the unit’s casework will void the manufacturer’s
warranty and may expose the user to a Risk of Electric Shock
resulting in serious injury or death.
DANGER
The externally accessible unit fuse will only blow under an
extreme internal fault condition. This fuse should only be
changed after the unit has been thoroughly inspected by a
qualified engineer. See section 8.1 for details.
DANGER
Always switch off the unit and disconnect the power cord
before performing any cleaning or decontamination procedure.
If liquid is spilt into or over the unit, switch off and disconnect
the power from the AC mains outlet before attempting to deal
with the spillage.
CAUTION
The use of harsh chemicals and cleaning agents may damage
the unit and degrade its performance.
Always follow the cleaning and decontamination procedures
specified in sections 8.2 and 8.3 of this instruction manual.
Содержание Co-mix
Страница 1: ...Instructions for Use...