Vitl Co-mix, Инструкция по эксплуатации

Страница: 22 / 51

Instructions for Use
22
The plate clamping mechanism will automatically open to accept the plate or
adaptor block to be mixed.
Programs Profile Clamp Mute Start
The adaptor block type is displayed in the top right-hand corner of
the status area, or as ‘x’ if none is required. Refer to sections 6.3.3
and 6.3.4 for details relating to the use of specific adaptor blocks.
For pre-defined programs, the
Increase
,
Decrease
and
Profile
buttons are always disabled to prevent the program parameters
from being modified. Refer to section 7.1.2 for details of creating
user-defined variants of the pre-defined programs.
Place the plate or adaptor block into the plate holder, making sure it sitting
flat on the base of the holder, and then press the
Start
button to close the
clamping mechanism and begin the mixing process.
The mixing timer will count down each second until it reaches zero, or the
Stop
button is pressed.
When mixing is complete, the unit beeps and the plate clamping mechanism
automatically opens so that the plate or adaptor block can be removed.
The display will return to the previous screen, ready to accept the next plate
to be mixed, or press the
Programs
button to close the clamping mechanism
and return to the program selection screen.
The clamping mechanism can be manually opened or closed by pressing the
Clamp
button.