Setting Recognize Options and Proofing a Recognized Document
■
Click the text view button in the Status bar, or by choosing Text from the View
menu.
To edit text within a line:
1. Move the pointer over the text line.
The pointer indicates the text selection.
2. Click anywhere within the line.
The line becomes active for editing. The blinking vertical bar cursor indicates
where the insertion point is on the line.
Clicking anywhere outside the active line deactivates it. If the click is in
another text line, that line becomes active.
3. Edit the line.
4. To edit a different line, repeat steps 1 and 2 or use the arrow keys to move to a
new line.
NOTE: When you’ve selected text manually, the On-Screen Verifier is not
automatically displayed. You can display it by choosing Proofing Verifier from the
View menu.
Standard Text Editing Operations
The following standard text editing operations are available to edit text within a line in
the text view.
To
Do this...
Select text
Click and drag.
Extend the selection one word to the
left or right
Ctrl-Shift-left/right arrow
Extend the selection to the beginning
or the end of the line
Shift-Home/End
Select a word
Double-click the word
Select contents of an entire line
Triple-click a word in the line.
file:///C|/VisioneerDoc/html/05recog.htm (16 of 24) [1/20/2003 4:21:21 PM]