Locating Text and Graphics
Overlapping Locate Regions and Skewed Text
When you manually create text or numeric regions, you should be aware of the
following constraints.
If a text or numeric region cuts through a character, only the part of the character
that is within the region is located. When these cutoff characters are recognized,
most of them will be illegible. This can happen when the characters are cut off at
the sides or when they’re cut off at the top or bottom:
NOTE: If the characters along the edges of a text or numeric region you’ve defined
manually are illegible, go back to the image view and check to make sure that the
text or numeric region does not cut off any of the edges of the text image.
If a line of text or numbers is enclosed within more than one text or numeric region,
it is located only once. If the line is fully enclosed within both regions, it is located
within the text or numeric region that is ordered first in the sequence:
If the line is fully enclosed within one region and only partially enclosed within
another region, the line is located within the text or numeric region that fully
encloses it:
file:///C|/VisioneerDoc/html/04locate.htm (16 of 22) [1/20/2003 4:21:20 PM]