Vinyl Express Q100, Руководство пользователя

Страница: 51 / 180

Preparing to Cut: Selecting the Media Type
3 - 17
3.7 Selecting the Media Type
1 If you have already loaded the media, the MEDIA TYPE menu appears. Select
the media type to suit the loaded media.
Rear Loading Front Loading
The loading method screen (Rear or Front) that is first displayed is the screen
that was last used.
Select the media type.
When to press the F1 key to select ROLL 1 REAR SET/ROLL 1 FRONT SET
Press the F1 key when you have loaded a roll of media and you wish to start
cutting or plotting from the leading edge. The width and leading edge of the roll
media are detected. The pen carriage moves to the origin point after the initial-
ization routine has been executed.
When to press the F2 key to select ROLL 2 REAR SET/ROLL 2 FRONT SET
Press the F2 key when you have loaded a roll of media and you wish to start
cutting or plotting from a point beyond the leading edge. Only the width of the
roll media is detected.
If the F1 or F2 key is pressed, the following prompt appears. Confirm that the
media lock has been released, and then press the ENTER key.
When to press the F3 key to select SHEET
Press the F3 key when a cut sheet has been loaded. The leading edge, trailing
edge, and width of the sheet are detected.
When to press the F4 key to select CONTINUE
The CONTINUE function enables the continued use of the plotting area, pen
position and origin position that were specified before the media set lever was
lowered. If the current media is the same size as the last media that was
loaded, the plotter does not detect the media's edges. (The CONTINUE menu
parameter appears when the media set lever is raised and then lowered again
after media was previously loaded.)
ROLL 1 REAR SET>
ROLL 2 REAR SET>
SHEET>
[NEXT]
←
—
→
ROLL 1 FRONT SET>
ROLL 2 FRONT SET>
SHEET>
PRESS ENTER KEY
AFTER RELEASING
MEDIA LOCK
Release media lock