Villa Rotograph EVO, Руководство по обслуживанию

Страница: 86 / 223

SERVICE MANUAL
Maintenance and servicing
(Rev. 1) Rotograph EVO 7-15
2. Using the scroll right and scroll left keys to change the
message displayed until the "TROUBLESHOOTING" message appears
on the lower row.
When the following menu is displayed:
S E R V I C E M E N U
T R O U B L E S T O O T I N G
Pressing the key "Patient Entrance" (7) the next message is
displayed:
S E T U P
P A S S W O R D ? 1 0 0
3. Using the increase/decrease keys, set the password equal to 112 and
confirm with the key "Patient Entrance" (7).
4. Using the scroll right and scroll left keys go to the "RX
EMISSION" menu and confirm with the key "Patient Entrance" (7).
At the selection of the X-ray emission test, the display will show the
following message:
X - R A Y E M I S S I O N
7 2 k V 0 6 m A 1 4 . 0 S
WARNING:
From now, the emission is enabled; it starts with the X-ray button press,
so take care of this situation.
Pressing the parameter changes key (3) , it is possible to
choose a different combination of parameters. Once pressed, the
display will show:
> 7 2 k V 0 6 m A 1 4 . 0 S
Where the symbol ">" is showing the parameter to be changed; in this
case the kV. To move to mA and exposure time, press key (3) once or
twice again.
In this situation, the increase key (4) and the decrease key (5)
will change the parameter.
Pressing the X-ray button will start the emission.