Villa Rotograph EVO, Руководство по обслуживанию

Страница: 48 / 223

SERVICE MANUAL
Technical data
(Rev. 1) Rotograph EVO 4-11
4. To set the exposure parameters, press key (3) , the display will
show respectively one of the following three indications:
> x x k V x x m A x x . x s
x x k V > x x m A x x . x s
x x k V x x m A > x x . x s
The symbol ">" indicates which parameter is being changed.
The selected parameter can be modified by pressing the increase
key (4) and the decrease key (5) .
The parameters can vary within the limits shown in the following
table:
Parameter Minimum value Maximum value
kV 60 86
mA 6 12
s 0.2 15
5. Perform an exposure; the emitted parameters (kV and Time) can be
read on the measuring instrument.
NOTE:
The performances are guaranteed only if the measurement of kV and
time is done with the invasive method, due to the fact that the
non-invasive method may introduce errors for instruments tolerance or
wrong measurement condition.
6. To end the control program, press key "Test" (6) ; the display
will indicate:
x x k V x x m A x x . x s
P A N O R A M I C - S T D
and the unit will return to standard mode.
*