Villa Rotograph EVO, Руководство по обслуживанию

Страница: 126 / 223

SERVICE MANUAL
Troubleshooting
(Rev. 1) Rotograph EVO 8-35
8.3.4. Password 118: Axis alignment menu
When the following menu is displayed,
S E R V I C E M E N U
C O N F I G U R A T I O N
Using the left/right scroll key is possible to change the message, use the
keys until to the following message is visualized:
S E R V I C E M E N U
A X I S A L I G N E M E N T
Pressing the Patient centering (>0<) key the next message asking for the
correct password is shown.
S E T U P
P A S S W O R D ? 1 0 0
Using the increase/decrease key , set the password equal to "118"
and confirm with the Patient centering key . Before entering the
relevant menu, the system centering functions are performed; those
operations can be interrupted, if needed, by pressing once again the
Patient centering (>0<) key.
NOTE:
Interruption of this operation must be performed only in case those
functions are used to check some hardware faults. If the system needs to
be centered, the operation must be completed.
Once the operation is finished (or interrupted), it is possible to access the
following list of submenus:
ROTATION ZERO ⇔ Y AXIS ZERO ⇔ CASSETTE ZERO ⇔
PR. COLL. SETUP ⇔ ROTATION ZERO ..
The selection is confirmed pressing the Patient centering (>0<) key.
*