Villa Rotograph EVO, Руководство по обслуживанию

Страница: 133 / 223

SERVICE MANUAL
Troubleshooting
Rotograph EVO (Rev. 1) 8-42
8.3.5. Password 124: CEPH settings
NOTE:
The complete procedure to enter in password 124 is described on
paragraph 7.1.2 and following.
When the following menu is displayed,
S E R V I C E M E N U
C E P H S E T T I N G S
Pressing the Patient centering (>0<) key the next message is displayed,
asking for the correct password.
S E T U P
P A S S W O R D ? 1 0 0
Using the increase/decrease keys, set the password equal to "124"
and confirm with the Patient centering key. The system will begin
the sequence to align the X-ray beam to the Ceph arm.
The operations contained in this menu are useful to enable the Ceph
examination and perform all operation to center the Ceph.
Once completed the zeroing, the following message is visualized:
C E P H M E N U
E N A B L E C E P H
and it is possible to select one of the following operation:
ENABLE CEPH ⇔ Y OFFSET ⇔ ROTATION OFFSET ⇔
PR. COLL. SETUP ⇔ DISK COLL TYPE ⇔ DEFAUL FORMAT ⇔
ENABLE CEPH ….
The selection is confirmed pressing the Patient centering (>0<) key.
The exit from each menus is performed using the Test (T) button; the
value is updated or not by pressing the appropriate button as an answer
to the following message:
U P D A T E C H A N G E S ?
>
0 < = Y , T = N
In both cases, the upper level of service menu is reached.
*