Villa Rotograph EVO, Руководство по обслуживанию

Страница: 122 / 223

SERVICE MANUAL
Troubleshooting
(Rev. 1) Rotograph EVO 8-31
8.3.3.2. Date-Time set
In this menu, it is possible to adjust the internal Real Time Clock (RTC);
this RTC is used to check the correctness of the Cooling Down time of the
tubehead.
NOTE:
It will take care of standard operation (hour and date change, leap year
calculation, etc.) but does not consider Summer Time Hour Changes.
The RTC clock is set at the Factory hour/date (Central Europe date/time)
during the final test of the equipment. It is the installer’s responsibility to
set, if wanted, the local date/time.
Once selected, the following message is displayed:
D A T E - T I M E S E T
D A T E : D D / M M / Y E A R
It is possible to scroll between the date and time set.
Confirming the Date change, the display changes as follows:
A D J U S T D A T E
D > X X M Y Y Y Y Y
The ">" symbol is signalling which parameter is going to be modified; in
this case the day, while the mouth and year are to be modified if one of
the following message is displayed, respectively.
A D J U S T D A T E
D X X M > Y Y Y Y Y
A D J U S T D A T E
D X X M Y Y Y > Y Y
*