Villa Rotograph EVO, Руководство по обслуживанию

Страница: 77 / 223

SERVICE MANUAL
Maintenance and servicing
Rotograph EVO (Rev. 1) 7-6
7.2.2. Alignment for the CEPH function
NOTE:
When these operations are performed during Maintenance it will be
necessary to remove some of the covers.
To verify the centering of the Cephalometric function it is necessary to:
1. Switch ON the machine and access "CEPH SETTING" service program
following the operations sequence described in paragraph 8.3.1.
Using the increase key (4) and the decrease key (5) set the
password equal to 124 and confirm with the "Patient entrance" (7)
key .
M A C H I N E S E T T I N G
P
R E S S > 0 <
2. Close the Panoramic sensor holder, if open, and press key (7) ;
the following message will be displayed:
W A I T F O R
M A C H I N E S E T T I N G
followed by
C E P H P O S I T I O N I N G
P
L E A S E W A I T
When the machine stops moving, the following message will be
displayed:
C E P H M E N U
E N A B L E C E P H
3. Press key (7) , the following message will be displayed:
C E P H M E N U
C E P H I S D I S A B L E D
*