Villa Rotograph EVO, Руководство по обслуживанию

Страница: 66 / 223

SERVICE MANUAL
Installation
(Rev. 1) Rotograph EVO 6-7
4. Position the rotating arm on the column inserting it in the retaining
bracket (Figure 6-5). While a person keeps it in position, the other
has to fix the two backside screws "A" (Figure 6-6) to the column
without tightening them.
Retaining bracket
Figure 6-5
5. Remove the two posterior screws fixing the CPU board support plate
to the rotating arm and tilt it at about 75°; lock the support plate to
the lateral frame.
6. Insert the reference pins "B" (Figure 6-6) between the rotating arm
and column using a hammer. Insert the remaining two screws "C"
(Figure 6-6) and tighten all the fixing screws.
B A C
Retaining bracket
Figure 6-6