VideoIQ ICVR Скачать руководство пользователя страница 87

Страница: 87 / 170

VideoIQ User Guide

2. The

Preview type

drop-down menu allow you to see either your alarm or non-

alarm videos based on the current bitrate and storage compression settings.



To preview high-quality video, select the

Alarm Video

option.



To preview the low-quality, continuous record video, select the

Non-alarm

Video

option.

3. The iCVR allows recording and monitoring of 2 video streams: a high-quality

video stream for alarms, and a low-quality video stream that can be used to
record continuously. If you want to continuously record low-quality video
select

Video

Video with Audio

. When you choose

Video with Audio

you

will be asked to read and accept a privacy warning.

If you do not want to record continuously select

None

. This will ecord event

video only.

Note:

Recording video with audio will double the size of the alarm clips.

4. The Disk Clean-up option allows you to decide which files are deleted when

the storage within the iCVR is filled. Selecting

Delete non-alarm files first

will keep alarm files and delete continuous recording files first.

Note:

After months of usage, this could result in only 1 days worth of continuous
recordings and the rest of the disk will retain alarm files.

If you select

Delete any files based on age

, this will delete the oldest files

first.

5. Use the

Estimated average alarm activity

option buttons to specify the

expected number of alarms. This is used to estimate the number of days that
video will be stored on the iCVR hard disk.



Typical - Alarm events occur up to 30% on average.



High - Alarm events occur 30%-50% on average.



Virtually continuous - Alarm events are occurring more than 50% of the
time on average.

6. Click the

Modify

button to change the Resolution, Frame Rate and Bit Rate

for alarm and non-alarm recording. Available rates will change based on the
resolution chosen.

7. Use the

Pre-alarm Recording

drop-down menus to specify the number of

seconds prior to an alarm being triggered that are recorded for full alarm
events or an alarm clip.

8. The

Storage Capacity

field reflects the size of the camera’s disk space.

Days of Storage

reflects the number of days of storage based on the settings

you’ve selected.

10. Click

Apply

. Review the quality of the video in the Preview window and make

any configuration adjustments necessary.

Содержание ICVR











































































































































































Результаты поиска

Содержание ICVR

Отзывы:

Похожие инструкции для ICVR

Бренды по названию

Популярные бренды

VideoIQ ICVR, Руководство пользователя

Результаты поиска

Содержание ICVR

Отзывы:

Похожие инструкции для ICVR

Бренды по названию

Популярные бренды