VideoIQ ICVR, Руководство пользователя

Страница: 165 / 170

VideoIQ User Guide
155
Could not update information
for user NAME OF USER on
some cameras supervisor edited user and info goes to all connected
cameras. some may not respond in time when the update
occurs, such as bad connection
Current user is not authorized
to perform operation. You do not have the correct Operator permissions to perform
this function. Contact your supervisor.
User NAME OF USER is not
authorized to perform NAME OF
ACTION. You do not have the correct Operator permissions to perform
this function. Contact your supervisor.
The password must be at least
4 characters long. Your password must be at least 4 characters long, and can
contain both letters and numbers.
Could not write settings to
camera “NAME OF CAMERA”. The camera may have become disconnected or the process
timed out while trying to update the settings.
Camera “NAME OF CAMERA”
closed connection to the server. The camera listed in the message became disconnected
during operation.
NAME OF USER password could
not be changed for all cameras. A user is changing their password, but the information has
not been updated on all cameras, possibly because of a
timeout.
Could not copy user accounts
from camera “NAME OF
CAMERA” to camera “NAME OF
CAMERA”. A supervisor tries to copy user account from one camera to
one other camera. copy fails, possibly from a timeout or
because a camera has become disconnected.
CONNECTION LIMIT EXCEEDED The maximum number of connections for each camera is 3.
Camera firmware version is too
new. It is not supported by this
version of VideIQ server. Please
upgrade your VideoIQ server.
The version of the firmware on the camera is newer than the
version of the View software you have installed. Please
update your View software.
Name RULE NAME is reserved
and cannot be assigned to a
rule. Please enter another rule
name. You cannot use the word “any” as a name for your rule.
Failed to set PTZ home position. Check the connection between the Encoder and the PTZ
camera.
You do not have administrator
privileges for this camera. The
camera will keep previous
credentials. You may not be a supervisor on all cameras, but are trying to
change the credentials for a camera. The camera will not
accept this update, and retains the last set of valid
credentials.
Error Message Description