Viadrus EKORET SAPHIR 15, Руководство по эксплуатации и установке

Страница: 50 / 68

50
P 206
Ventilator X4 hard coal [%]
It regards the percentage value of ventilator output
The value 100 represents 100% ventilator and actual ventilator output of parameter 207 is assigned to
this value.Note: This parameter cannot be changed
P 207
Ventilator Y4 hard coal [%]
Setting the actual ventilator output for
Č
U as the fuel relating to 100% ventilator output
P 208
Ventilator slowing-down in the attenuation regime– hard coal [s]
Setting the ventilator slowing-down in the attenuation regime against the feeder runtime in the
attenuation regime
P 209
Ventilator output in the attenuation regime – hard coal [%]
Setting the ventilator output in the attenuation regime
P 210 Feeder X1 pellets [%]
It regards the percentage value of output.
The value 0 represents min. output and feeder standstill time of parameter 211 is assigned to this
value.Note: This parameter cannot be changed
P 211 Feeder Y1 pellets [s]
Setting the feeder standstill time for pellets as the fuel relating to 0% output
P 212 Feeder X2 pellets [%]
It regards the percentage value of output.
The value 33 represents 33% output and feeder standstill time of parameter 213 is assigned to
this value.Note: This parameter cannot be changed
P 213 Feeder Y2 pellets [s]
Setting the feeder standstill time for pellets as the fuel relating to 33% output
P 214 Feeder X3 pellets [%]
It regards the percentage value of output.
Value 66 represents 66% output and feeder standstill time of parameter 215 is assigned to this
value. Note: This parameter cannot be changed
P 215 Feeder Y3 pellets [s]
Setting the feeder standstill time for pellets as the fuel relating to 66% output
P 216 Feeder X4 pellets [%]
It regards the percentage value of output.
Value 100 represents 100% output and feeder standstill time of parameter 21 is assigned to this
value 7. Note: This parameter cannot be changed
P 217 Feeder Y4 pellets [s]
Setting the feeder standstill time for pellets as the fuel relating to 100% output
P 218 Feeder runtime in the attenuation – pellets [s]
Setting the feeder runtime in the attenuation regime for pellets as the fuel
P 219 Standstill time(delay) of feeder in the attenuation – pellets [min.]
Standstill time of the feed screw in the attenuation regime for pellets as the fuel
P 220 Ventilator X1 pellets [%]
It regards the percentage value of ventilator output
The value 0 represents min. ventilator output and the actual ventilator output of parameter 221 is
assigned to this value. Note: This parameter cannot be changed
P 221 Ventilator Y1 pellets [%]
Setting the actual ventilator output for pellets as the fuel relating to 0% ventilator output
P 222 Ventilator X2 pellets [%]
It regards the percentage value of ventilator output
Value 33 represents 33% ventilator output and the actual ventilator output of parameter 223 is
assigned to this value. Note: This parameter cannot be changed
P 223 Ventilator Y2 pellets [%]
Setting the actual ventilator output for pellets as the fuel relating to 33% ventilator output
P 224 Ventilator X3 pellets [%]
It regards the percentage value of ventilator output
Value 66 represents 66% ventilator output and the actual ventilator output of parameter 225 is
assigned to this value at parameter 225. Note: This parameter cannot be changed