Viadrus EKORET SAPHIR 15, Руководство по эксплуатации и установке

Страница: 8 / 68

8
4. Positioning and installation
4.1 Rules and regulations
A solid fuel boiler can only be installed by a firm holding a valid concession for boiler installation and
maintenance.
A project according to the valid regulations must be prepared for the installation.
The heating system must be filled with water, that meets the
Č
SN 07 7401 requirements, especially its
harness must not exceed the required parameters.
Recommended values
Hardness mmol/l 1
Ca
2+
mmol/l 0,3
Concentration of total Fe + Mn mg/l (0,3)*
*) recommended value
WARNING!!! The use of anti-freeze mixture is not recommended by the manufacturer.
a) to the heating system
Č SN 06 0310 Heating systems in buildings – Designing and installation
Č SN 06 0830 Heating systems in buildings – protecting device
Č SN 07 7401 Water and steam for thermal energy equipments with working pressure up to
8 MPa
EN 303-5 Heating boilers – Part 5: Heating boilers for solid fuele, hand and automatically
stocked, nominal heat output of up to 300 kW – Terminology, requirements,
testing and marking
b) to the chimney
Č SN 73 4201 Chimneys and flue gas ducting– designing, implementation and connection of
fuel consumers.
c) regarding the fire regulations
Č SN 06 1008 Fire safety of heat installations.
EN 13501-1 + A1 Fire classification of construction products and building elements – Part 1:
Classification using test data from reaction to fire tests.
d) to the electrical network
Č SN 33 0165 Electrical regulations. Marking the conductors with colours or digits.
Implementing regulations.
Č SN 33 1500 Electrical regulations. Electrical equipments revision
Č SN 33 2000-3 Electrical regulations. Electrical equipments Part 3: Setting the basic
characteristics.
Č SN 33 2000-4-41 Electric equipments: part 4: Safety chap. 41: Protection against electrical
accident.
Č SN 33 2000-5-51 ed.2 Electrical regulations. Electrical equipments construction.
Č
SN 33 2130 Electrical regulations. Internal wiring.
Č SN 33 2180 Electrical regulations. Connection of electrical devices and appliances.
Č SN 34 0350 Electrical regulations. Regulations for mobile connections and cord extension
sets.
EN 60079-10 Electrical apparatus for explosive gas atmospheres – Part 10: Classification of
hazardous areas.
EN 60 252-1 AC motor capacitors – Part 1: General – Performance, testing and rating –
Safety requirements – Guide for installation and operation.
EN 60 335-1 ed.2 Household and similar electrical appliances – Safety – Part 1: General
requirements.
EN 60 335-2-102 Household and similar electrical appliances – Safety – Part 2-102: Particular
requirements for gas, oil and solid-fuel burning appliances having electrical
connections.
EN 60445 ed. 3 Basic and safety principles for man – machina interface, marking and
identification – Identification of equipment terminals and conductor terminations
EN 60446 Basic and safety principles for man – machina interface, marking and
identification – Identification of conductors by colours or numerals
e) to the system of HWS heating
Č SN 06 0320 Heating systems in buildings – Hot water preparation – Designing and planning
Č SN 06 0830 Heating systems in buildings – Safety devices.
Č SN 73 6660 House water plumbing