Viadrus EKORET SAPHIR 15, Руководство по эксплуатации и установке

Страница: 23 / 68

23
- We jacket the boiler (see chap. 5.2.3).
- We apply mastic to the fuel feeder flange and connect it to the boiler basement (the connection
accessories are as follows: 4 pc screw M10 x 20, 4 pc washer 10,5). We turn the motor in such a way
that it is in the rear when viewing the boiler from the front.
- We apply mastic to the fuel feeder flange and we connect the feeder with the fuel reservoir (the
connection accessories are as follows: 4 pc screw M8 x 20, 4 pc washer 8,4 and 4 pc nut M8).
- We connect the emergency fire-extinguishing equipment.
- We connect the service board incl. consoles to the fuel reservoir.
- We reconnect the components (in case the conversion was done already after the primary installation the
length of cables must be trimmed as need may be).
Fig. no. 18 EKORET SAPHIR boiler (left-hand design)
!!!!
Apply boiler mastic to the point
marked with caterpillar and put the
grate on the retort with mixer. It is
necessary to ensure the tightness
between the burner and grate.