Viadrus EKORET SAPHIR 15, Руководство по эксплуатации и установке

Страница: 18 / 68

18
5.2.4 Fuel reservoir and feeder assembly
1. Fuel feeder
2. Stud bolt M10x30 (4 pcs)
3. Washer 10,5
4. Nut M10 (4 pcs)
5. Ventilator
6. Screw M6x16 (4 pcs)
7. Washer 6,4 (4 pcs)
8. Nut M6 (4 pcs)
9. Fuel reservoir
10. Screw M8 x 20 (4 pcs)
11. Washer 8,4 (8 pcs)
12. Nut M8 (4 pcs)
13. Spacing clip (2 pcs)
14. Screw ST 4,8 x 13 (2 pcs)
Fig. no. 13 Fuel reservoir and feeder assembly
Notice:
At assembly of fuel feeder to the pedestral and fuel reservoir to the fuel feeder position everything
horizontally and afterwards provide a final drawing up the screws and nuts.
1. Apply binding material on the boiler pedestral, afterwards assembly a set of fuel conveyer to the boiler
pedestral. Further assembly a fan.
2. Apply the binding material on set of fuel conveyor on the surface of fuel reservoir binding face. Settle the
fuel reservoir and tighten the screw.
3. Fix distance clamps for caballing on the sides of fuel reservoir.
ATTENTION!!! Before the fuel reservoir is loaded with fuel it is necessary to check the free
rotation of fuel feed screw.