Vertical SBX IP 320, Особенности и руководство по эксплуатации

Страница: 112 / 248

Incoming Call Pickup 102
SBX IP 320 Features & Operation Guide
Ring Assignment
A pre-assigned destination receives incoming calls through the CO Line. The destination can be
a Station, Hunt Group, or VMIB Announcement. If a destination station is busy, the incoming
call returns a muted ring signal, so the station user can pickup the incoming CO Call as needed.
Operation
Ex. 1 When there's an incoming CO Call through CO Lines 1-8 during Day mode, the Stations
101-105 (as available) start to ring instantly. If one of the stations answers the call, other stations
stop ringing. After 9 seconds, if the call is still not answered, station 100 (Attendant) starts to
ring.
1. Set CO Service Type as Normal at the PGM 140 menu item.
2. At PGM 144, select CO Line Range 01-08 and press FLEX 1 for Day Mode.
3. Dial 1 for the Station, and enter the station range 101105.
4. Press 0 to make the stations ring instantly when there is an incoming call.
5. To save changes, press the [HOLD/SAVE] button.
6. Press FLEX 1 for Day Mode again without exiting PGM 144, and press 1 for the Station
again.
7. Enter Station Range as 100100, and dial 9 as the delay value. Press [HOLD/SAVE] again.
Ex. 2 When there's an incoming CO Call through CO Lines 1-8 during Night mode, the Hunt
Group starts to ring. The ringing station is decided by the Hunt Group type.
1. Verify the CO Service type is set to Normal at PGM 140.
2. Check if Hunt Group 620 is assigned properly at PGM 190.
3. At PGM 144, select CO Line range 01-08 and press FLEX 2 (Night Mode).
4. Dial 2 for the Hunt, and enter Hunt Group Number 620.
5. To save changes, press the [HOLD/SAVE] button.