Verizon MI424WG Скачать руководство пользователя страница 16

Страница: 16 / 208

Introduction

1.4 Getting to Know the FiOS Router

Reset Button

To restore the FiOS Router’s factory default settings, press and hold the Reset

button for approximately ten seconds. The reset process will start about ten

seconds after releasing the button. When the FiOS Router resets, all the lights

on the front panel turn off, and then some of the lights start flashing. The FiOS

Router has completed its reset process when the Power light glows steadily

green.

Caution!

Do not unplug the Power cord from the FiOS Router during the

reset process. Doing so may result in the loss of the FiOS Router’s configuration

information. If this occurs, reset the FiOS Router again.

LAN Ethernet Ports (4)

The LAN Ethernet ports connect devices to the FiOS Router via Ethernet cables

to create a local area network (LAN). The LAN Ethernet ports are 10/100 Mbps

auto-sensing ports, and either a straight-through or crossover Ethernet cable

can be used when connecting devices to the ports.

WAN Ethernet Port

The WAN Ethernet port connects the FiOS Router to the ISP using an Ethernet cable.

USB Port

The USB port provides up to 5 VDC for attached devices (to charge a cell phone,

for example). In the future, with a firmware release upgrade, the USB host

functionality will be available for devices such as external storage and cameras.

Wireless Antenna(s)

The FiOS Router’s wireless antenna(s) is used to transmit a wireless signal to

other wireless devices on its wireless network.

Содержание MI424WG








































































































































































































Результаты поиска

Содержание MI424WG

Отзывы:

Похожие инструкции для MI424WG

Бренды по названию

Популярные бренды

Verizon MI424WG, Руководство пользователя

Результаты поиска

Содержание MI424WG

Отзывы:

Похожие инструкции для MI424WG

Бренды по названию

Популярные бренды