VERITAS 5350, Руководство по установке оборудования

Страница: 98 / 120

9
Turn on the devices in the proper sequence as described in this section.
See “Turning on the hardware and verifying operation” on page 77.
10
Add the new disk space with the instructions in one of these sections.
See “Adding the disk space of an Expansion Storage Shelf from the NetBackup
Appliance Web Console” on page 115.
See “Adding the disk space of an Expansion Storage Shelf from the NetBackup
Appliance Shell Menu” on page 117.
Connecting three Expansion Shelves to the
Primary Shelf
Two of the three Expansion Shelves connect to the Primary Shelf but not directly
to the compute node.
To connect three Expansion Shelves
1
Verify that all compute nodes and the Primary Shelf are off and that the power
cords are unplugged.
Do not remove the cables between the compute nodes and the Primary Shelf.
2
Obtain the two SAS-3 cables that ship with each Expansion Shelf.
3
Identify the single SAS-3 port on the left side of each controller module in the
Primary Shelf.
4 Identify ports A and C in each I/O module in the Expansion Shelf. Port B is not
available for use.
98 Adding Expansion Storage Shelves to an operating appliance that does not have any Expansion shelves
Connecting three Expansion Shelves to the Primary Shelf