Adding the disk space of an Expansion Storage
Shelf from the NetBackup Appliance Shell Menu
The following procedure describes how to add new storage shelf disk space to a
53xx appliance by using the NetBackup Appliance Shell Menu.
To add the disk space of an expansion shelf from the NetBackup Appliance
Shell Menu
1
Use PuTTY to start an SSH session to access the NetBackup Appliance Shell
Menu.
Note:
You can also connect a laptop, keyboard and monitor, or KVM to the
appliance to access the NetBackup Appliance Shell Menu.
2
Log in to the NetBackup Appliance Shell Menu. The
Main_Menu
prompt
appears.
3
Navigate to the
Monitor
menu as follows:
Enter
Monitor
and press
Enter
.
4
Type
Hardware ShowHealth
and press
Enter
.
Information about the system appears. Browse to the
Primary Storage Shelf
to Expansion Storage Shelf Connection information
. The
Status
column
should say
Connected
.
5
At the prompt, type
return
to return to the
Main
menu.
6
Perform a scan as follows:
■
At the
Main_Menu
prompt, type
Manage
and press
Enter
.
■
Type
Storage
and press
Enter
.
■
Type
Scan
and press
Enter
.
The scan takes a couple of minutes to complete.
7
View the available storage space as follows:
■
Navigate to the
Storage
menu.
■
At the prompt, type
Show Disk
and press
Enter
.
Note that you can add the disks with status
New Available
.
8
From the
Storage
menu, enter
Add
and press
Enter
. It displays the disks that
are in a
New Available
state and can be added. Copy a disk ID that is
displayed.
117
Configuring the disk space for new NetBackup Expansion Storage Shelves
Adding the disk space of an Expansion Storage Shelf from the NetBackup Appliance Shell Menu
Содержание 5350
Страница 1: ...Veritas 5350 Appliance Hardware Installation Guide ...
Страница 13: ...The bottom drawer contains slots 42 through 83 13 Hardware overview 5U84 storage shelf drawers and disk drives ...
Страница 64: ...64 Hardware installation procedures Connecting the hardware to one compute node ...
