■
At least one power cable must be connected to a functioning power source.
■
At least one user must be enabled to use the LAN channel(s).
To access and use the IPMI web interface from a remote computer
1
Log on to a remote computer in the network and open a supported Windows
browser.
2
Enter the remote management port IP address that is assigned to the remote
management port. The following page appears:
3
Enter your login information. The default user name is
sysadmin
. The default
password is , where
0
is the number zero.
Click
P@ssw0rdLogin
.
4
Click the
Remote Control
section located at the top of the page. The
Remote
Control
section lets you remotely monitor and control the server.
Do
one
of the following to launch the Appliance Shell:
■
Navigate to
Remote Control
>
iKVM over HTML5
.
Click
Launch iKVM over HTML5
to launch the Appliance shell. A new
window opens that enables you to remotely monitor and control the
appliance.
■
Click
Remote Control
>
KVM/Console Redirection
. Click
Launch Console
to launch the appliance shell menu.
88
Hardware installation procedures
Accessing and using the Veritas Remote Management interface
Содержание 5350
Страница 1: ...Veritas 5350 Appliance Hardware Installation Guide ...
Страница 13: ...The bottom drawer contains slots 42 through 83 13 Hardware overview 5U84 storage shelf drawers and disk drives ...
Страница 64: ...64 Hardware installation procedures Connecting the hardware to one compute node ...
