VERITAS 5350, Руководство по установке оборудования

Страница: 47 / 120

12
Push the carrier forward towards the rear of the slot, in the direction of the
circled end of the carrier. The latch clicks into place. The yellow line is no longer
visible.
13
Press all carriers down into the slots and lock them forward.
14
Insert one disk drive into slot 56 and into all slots in the second row.
15
Press all carriers down into the slots and lock them forward.
16
Insert one disk drive into slot 70.
17
Insert blank carriers into slots 71 to 83.
18
Press all carriers down into the slots and lock them forward.
19
Verify that all carriers in the three rows are seated down in the slots. A carrier
that is not inserted correctly may hinder securing the drawer.
20
If you need to remove a disk drive, slide the release latch to the right. The disk
pops up.
21
Slide the drawer carefully into the shelf by pressing the two drawer release
buttons located (one per side) on the side of the drawer to close the drawer
until the latches click.
22
Engage the anti-tamper locks as needed.
47 Hardware installation procedures
Installing disk drives and blanks into a half-capacity storage shelf