VeEX MTX150 Series Скачать руководство пользователя страница 216

Страница: 216 / 303

Fiber Channel

216

Sequence count (SEQ_CNT):

The sequence count (SEQ_CNT) is a two-byte field (Word 3, Bits 15-0) that indicates the

sequential order of Data frame transmission within a single Sequence or multiple consecutive

Sequences for the same Exchange.

Originator Exchange_ID (OX_ID):

The Originator Exchange_ID is a two-byte field (Word 4, Bits 31-16) that identifies the

Exchange_ID assigned by the Originator of the Exchange.

Each Exchange is assigned an identifier unique to the Originator or Originator - Responder

pair.

Responder Exchange_ID (RX_ID):

The Responder Exchange_ID is a two byte field (Word 4, Bits 15-0) assigned by the Respon-

der that provides a unique, locally meaningful identifier at the Responder for an Exchange

established by an Originator and identified by an OX_ID.

Parameter:

The Parameter field (Word 5, Bits 31-0) has meanings based on frame type.

For Link_Control frames, the Parameter field is used to carry information specific to the indi-

vidual Link_Control frame.

For Data frames with the relative offset present bit set to 1, the Parameter field specifies rel-

ative offset, a four-byte field that contains the relative displacement of the first byte of the Pay-

load of the frame from the base address as specified by the ULP.

For detailed information, please visit

http://www.incits.org/

and download the Fiber Channel FRAMING AND

SIGNALING-2 (FC-FS-2) standard.

Test Applications

After selecting the Fiber Channel test mode, the

Fiber Channel

main menu appears.

Содержание MTX150 Series

































































































































































































































































































Результаты поиска

Содержание MTX150 Series

Отзывы:

Похожие инструкции для MTX150 Series

Бренды по названию

Популярные бренды

VeEX MTX150 Series, Руководство пользователя

Результаты поиска

Содержание MTX150 Series

Отзывы:

Похожие инструкции для MTX150 Series

Бренды по названию

Популярные бренды