6
Communications Setup
Auto-Dial Setup
6-14
To set the date of the weekly transmission, press CHANGE until the day on which you want to transmit the reports
appears. Press ENTER to confirm the date:
Press STEP to continue. If you are using the All Phones method or have set up all the receivers for Single Phone,
refer to the section entitled “Continue Communications Setup” on page 6-15. If you are using the Single Phone
method and have additional receivers to set up, refer to the section entitled “Setting Up the Frequency for
Additional Receivers (Single Phone Only)” on page 6-15.
AUTO-DIAL FREQUENCY: DAILY
If necessary, press STEP until you see the message:
Press CHANGE four times and press ENTER. The system displays the message:
Press STEP to display the message:
Press CHANGE and enter the time at which you want to transmit the reports. Press the Right Arrow key to choose
AM or PM. Press ENTER to confirm your entry:
Press STEP to continue. If you are using the All Phones method or have set up all the receivers for Single Phone,
refer to the section entitled “Continue Communications Setup” on page 6-15. If you are using the Single Phone
method and have additional receivers to set up, refer to the section entitled “Setting Up the Frequency for
Additional Receivers (Single Phone Only)” below.
AUTO-DIAL FREQUENCY: BIR END
If necessary, press STEP until you see the message:
Press CHANGE five times and press ENTER. The system displays the message:
Press STEP to continue. The system displays the message:
DAY
PRESS <STEP> TO CONTINUE
ALL RCVRS
ON DATE
DAILY
PRESS <STEP> TO CONTINUE
DAILY: ALL RCVRS
TIME: DISABLED
TIME: (Time)
PRESS <STEP> TO CONTINUE
ALL RCVRS
ON DATE
BIR END
PRESS <STEP> TO CONTINUE
DIAL BIR END: ALL RCVRS
TIME DISABLED
