6-13
6
Communications Setup
Auto-Dial Setup
For example, if you chose to transmit the reports on the Friday of the first week of June, the system would display
the message:
Press STEP to continue. If you are using the All Phones method or have set up all the receivers for Single Phone,
refer to the section entitled “Continue Communications Setup” on page 6-15. If you are using the Single Phone
method and have additional receivers to set up, refer to the section entitled“Setting Up the Frequency for
Additional Receivers (Single Phone Only)” on page 6-15.
AUTO-DIAL FREQUENCY: MONTHLY
If necessary, press STEP until you see the message:
Press CHANGE twice and press ENTER. The system displays the following message:
Press STEP to display the message:
To set the date of the monthly transmission, press CHANGE until the week during which you want to transmit the
reports appears and press the Right Arrow key. Press CHANGE until the day on which you want to transmit the
reports appears. Press ENTER to confirm the date:
Press STEP to continue. If you are using the All Phones method or have set up all the receivers for Single Phone,
refer to the section entitled “Continue Communications Setup” on page 6-15. If you are using the Single Phone
method and have additional receivers to set up, refer to the section entitled “Setting Up the Frequency for
Additional Receivers (Single Phone Only)” on page 6-15.
AUTO-DIAL FREQUENCY: WEEKLY
If necessary, press STEP until you see the message:
Press CHANGE three times and press ENTER. The system displays the message:
Press STEP to display the message:
JUNE WEEK 1 FRI
PRESS <STEP> TO CONTINUE
ALL RCVRS
ON DATE
MONTHLY
PRESS <STEP> TO CONTINUE
MONTHLY: ALL RCVRS
WEEK1 MON
WEEK DAY
PRESS <STEP> TO CONTINUE
ALL RCVRS
ON DATE
WEEKLY
PRESS <STEP> TO CONTINUE
WEEKLY: ALL RCVRS
MON
