7-15
7
In-Tank Setup
High Water Limit
High Water Limit
If necessary, press STEP until you see the message:
Note: This message does not appear for tanks in which high alcohol probes are installed.
When water in the tank rises to this High Water Limit value, the system triggers an alarm. Set this value at a level
lower than the pickup for the submersible pump or suction line [see Figure 7-1].
To enter the High Water Limit value for the selected tank, press CHANGE. Enter the limit in inches (5.0 maximum)
or millimeters (199 maximum), depending on the units established in System Setup. Press ENTER to confirm your
entry. The system displays:
Press STEP to continue.
Water Alarm Filter
Note: This message does not appear for tanks in which high alcohol probes are installed
If necessary, press STEP until you see the message: .
To help prevent false water alarms during deliveries, the Water Alarm Filter allows the user to select from several
filters that will delay the posting of a water alarm. The filter choices are: Low (default), Medium, High and Off.
The default filter setting of Low provides a quick response and will not inhibit a water alarm during a delivery. In
most applications it provides the quickest response without false water alarms.
If deliveries are causing an unacceptable number of false water alarms with the Low Filter setting, increase the
water filter level to Medium. If false water alarms continue, select High. The medium and high filter selections will
inhibit the water alarm during a delivery.
The Low, Medium and High selections all use a 3 minute delay before posting a water alarm. If a Water Alarm
delay of less than 3 minutes is desired, select Off for the Water Alarm Filter. The filter level Off does not inhibit
alarms during the delivery and the delay time is programmable from 30 to 180 seconds (default). When the filter
level Off is selected the message below displays:
Press CHANGE to select a different filter (or delay as appropriate), press ENTER to confirm the change, then
STEP; otherwise press STEP to continue.
T1: (Product Label)
HIGH WATER LIMIT: 0:0
HIGH WATER LIMIT: X.X
PRESS STEP TO CONTINUE
T1: (Product Label)
WATER ALARM FILTER: LOW
T1: (Product Label)
WATER ALARM DELAY: 180S
